| Model | AC Inlet | Power Consumption | Charging Rating |
| STD-4022C |
C6 |
88W |
40V/2.2A |
| STD-4221C |
C6 |
88W |
42V/2.1A |
| STD-44027C |
C6 or C14 |
120W |
44V/2.7A |
| STD-56021C |
C6 or C14 |
120W |
56V/2.15A |
| Input |
| Voltage |
100-240VAC |
| Line Frequency |
50-60Hz |
| Current |
1.2A MAX for 88W / 1.6A MAX for 120W |
| Protection |
Internal Primary Current Fuse, Inrush Limiting |
| Output |
| Load Regulation |
± 5% |
| Ripple |
1~2% V p-p Max. for Output Voltage @ Full Load |
| Transient Response |
0.5ms for 50% Load Change Typical |
| Holdup Time |
10mS @ Full Load |
| Protection |
Short Circuit Protection / Over Voltage Protection / Over Current
Protection / Over Temperature Protection (for 120W) |
| DC Cord |
18AWG / 16AWG / 14AWG |
| Ferrite Core |
Yes |
| Electrical |
| Topology |
Switching |
| Dielectric Withstand |
3.5mA @ 3 Pin |
| Leakage Current |
Less than 3.5mA |
| MTBF |
50,000 Calculated Hours at 25°C, by MIL-HDBK-217F |
| Safety & EMC |
| |
Based on Customer's Demand |
| Applicable Battery |
| |
LiFePO4, LiMnO4, LiCoO2 Rechargeable Battery |
| Application |
| |
Auto-Bicycle, Auto-Motorcycle, Auto-Car, Auto-Tooling, UPS,
3C Products |
| Charging Current Control |
| |
Constant Current--> Constant Voltage--> Charging Finished |
| Display Indications |
| |
Green- Standby |
| |
Orange- Charging |
| |
Green- Finish Charging |
| Charging Time |
| |
5 to 6 Hours for 10Ah Capacity, Up to Battery |
| Environmental |
| Operaturing Temperature |
0 to +40°C |
| Storage Temperature |
-20 to +60°C |
| Relative Humidity |
Operating: 20 to 80% RH |
| |
Storage: 10 to 90% RH |
| Cooling |
Natural Convection Cooling |
| Mechanical |
| Case Dimensions |
90W - L139 x W61 x H36 (mm) |
| |
120W - L168 x W66 x H39 (mm) |
| Weight |
90W - 415g (reference) |
| |
120W - 580g (reference) |
